ESP CanCam Manual de Instruções descarregar pdf (Página 16)

Press [UP] or [DN] to increase or decrease the Month value (1 - 12).•

Press [OK] to save your selection and enter Day setting.•

The DAY digits will be blinking. •

Press [UP] or [DN] to increase or decrease the Day value (01 – 31).•

Press [OK] to confirm the Date setting and enter Year setting.•

The YEAR digits will be blinking. •

Press [UP] or [DN] to increase or decrease the Year value (01 – 99).•

Once this is all done, press [OK]. You’ll then see the word - dEL - blinking. •

Press [M] button to exit the program setting and back to the status screen.•

Setting the Time Lapse Mode:

The Time Lapse default setting value is from 17:00 to 07:00 the next day. When

the camera is set to use the Time-Lapse mode (TLS), the program settings will

follow the Time Lapse settings. Outside of the Time Lapse time frame; the camera

will follow the user defined PIR settings.

The user can set the program for a pre-determined time period [such as 19:00 to

07:00]. The user then sets the frequency of still images only (video function not

available in Time Lapse mode). The camera will remain in Time Lapse mode until

the user has changed the program setting.

Slide the switch to the CAM position, LCD display•

will show the camera status screen.

Press the [M] button once within 30 seconds to•

enter the programming mode, the word PIR or TLS

will be blinking.

Press [UP] button until you see the word TLS•

blinking.

Press [OK] to confirm and go into TLS Mode "Start•

Time" setting.

The display will show T + S-88:88 (S = Start,•

88:88 = time in HH:MM).

Press [OK] to set the “Start Time” setting. At this•

point you can adjust the time from 00:00 to 23:59.

The MINUTE digits will be blinking. •

Press [UP] or [DN] to increase or decrease the•

minute value (00 – 59).

Press [OK] to save your selection and enter Hour•

setting.

The HOUR digits will be blinking. •

CanCam Manual_Layout 5 05/09/2013 12:22 Page 16

1 2 ... 11 12 13 14 15 16 17 18 19 20

Sem comentários

ESP CanCam Manual de Instruções Página 16